Tag: news

IHTA Podcast 10: Don’t Tell on Me with CtrlPew

Hello kids! On this wonderful podcast’s 10th episode, we interview firearm scholar and 3D printing extraordinaire, CtrlPew. I bring him here to talk about the evils of Red Flag Laws. I promise I don’t talk about shoes this time.
This Week in Guns 346

This Week in Guns 346
CTRL+PEW Puerto Rican Pistolero & Richard BWE/ Hank Strange WMMF Podcast/ Ep. 694

CTRL+PEW Puerto Rican Pistolero & Richard BWE Hank Strange WMMF Ep. 694
Agorist Nexus : Episode 22 3D printed guns with CTRLPew

In this episode, Brandon and Dag talk to CTRLPew about 3D-printed guns and the movement as a whole. Check out the Agorist Nexus here
The Morning Drive Podcast #143 : 3D Printer Go Burr

Hopped on The Morning Drive Podcast this am to ramble a bit about printed guns and two world wars. Give it a listen Follow The Morning Drive with David: Watch Here
Erase the State : 3D Printed Firearms with CTRL Pew

In this episode, Matty K invited Alex of CTRLPew to the show to talk about getting started with 3D printing. Follow and support CTRLPew at the following links: Follow us on Twitter: Listen Here
Bitcoin Rapid-Fire : CTRL PEW: The Latest on the 3D Printed Gun Revolution

Ctrl Pew is an expert in the realm of 3D-printed guns. I think at this point everyone has heard the term, but relatively few people are familiar with the state and development of the technology. I was recently surprised to learn how quickly it was evolving, so I thought it was finally time to speak…
We Like Shooting: Episode 352 – Wizard Sleve

Welcome to the We Like Shooting show, Episode 352 – tonight we’ll talk about Faxon Firearms, Swampfox Optics, Black Rhino Concealment, Bowers Group, Franklin Armory, Brownells, 224 Valkyrie, Glock 43, Reloading Revisited, Window Tinting, Hackett Equipment Rucksack, Chile’s Sig Clone, Bug-A-Salt, 3D printing, CtrlPew and more! Listen Here
Anarchast : Unstoppable Freedom with Deterrence Dispensed

Ivan the Troll and JStark went onto “The Anarchast” and discussed Deterrence Dispensed, the FGC9, Advancements in printing and more. Hit the links to check it out. I highly recommend the uncensored version because YouTube is ghey. Read more about ANARCHAST here. Youtube (Censored) Odysee (Uncensored)
FAGCast – #138 – Joe Bidenisms and 3D Printing with Alex @CTRLPew

I went on the Friends Against Government podcast, and we were supposed to talk about 3D printing but got distracted by Biden and Corona. Well get back together to do a primer on 3D printing soon, but in the mean time enjoy this episode.